Broom Finish and Textured Concrete in Nashville and Middle Tennessee
Decorative Concrete

Broom Finish and Textured Concrete

Simple, durable broom and textured finishes that give grip on driveways, walks and ramps at a friendly price.

The most common concrete finish is also one of the best: a broom finish. After the surface is floated and troweled, a stiff-bristled broom is pulled across it, leaving fine ridges that give traction. It is affordable, hides small imperfections and works well in the weather. Variations include light and heavy broom textures, swirl patterns, salt finishes and fine-textured surfaces. A Nashville driveway that sees rain and the occasional ice storm benefits from the grip of a good broom finish.

The look and feel depend on the timing and the tool. Too early, and the broom tears the surface. Too late, and it barely marks it. Our finishers read the slab and choose the broom and direction that suit the use: ridges perpendicular to the slope on ramps, a light texture on patios and a deeper one on steep walks. We finish edges with a tool for a neat border, add joints and cure the slab so the surface stays tough.

Grip where you need it

Broom texture gives traction on driveways, ramps and steps, in dry weather and wet.

Right depth for the job

Light textures suit patios and heavy textures suit steep or shaded areas.

Direction matters

Ridges run across the slope on ramps, so water and feet both have something to grip.

Neat edges and joints

Tooled borders and joints keep even a simple finish looking sharp.

What is included

  • Finish selection and texture sample
  • Base and forms
  • Pour and float
  • Broom or texture pass
  • Edges, joints and curing
  • Care guide
Before and after

See the transformation.

Drag the handle to compare.

After: a driveway with a smooth new broom-finished driveway with neat jointsBefore: a driveway with a cracked, stained and sunken old drivewayBeforeAfter
Cracked driveway replaced. From a cracked, stained and sunken old driveway to a smooth new broom-finished driveway with neat joints.
Why it works

What you get with Broom and Textured Finishes

Reliable grip

Dry or wet.

Hides imperfections

Forgiving.

Light to heavy

Matched to use.

Directional texture

Safe on slopes.

Budget friendly

Classic finish.

Tooled edges

Neat borders.

Try it now

Concrete Volume Calculator: How Many Yards Do I Need?

Enter length, width and thickness to see cubic yards, bags and truck loads for a slab, with a waste allowance.

How it works

Our process, start to finish.

  1. 01

    Call and schedule

    You tell us about your site and what you want, new concrete, a repair or a refresh, and we set a visit that fits your day.

  2. 02

    Visit and measure

    We walk the property, measure the area, check drainage, soil and access, look at any old concrete and take photos of anything of note.

  3. 03

    Plan and explain

    We explain your options for thickness, steel, finishes and colors, sketch the layout and give you a written scope with clear timing and pricing.

  4. 04

    Prepare the site

    We arrange for underground utilities to be located, protect the house, lawn and landscaping, remove old concrete if needed and compact a stone base.

  5. 05

    Form and pour

    We set forms and steel, check heights and slopes, place and finish the concrete and cut joints, with the crew on site from the first truck to the last pass.

  6. 06

    Cure and care

    We protect the concrete as it cures, clean up the site, walk you through when to use it and seal it, and set a reminder for your next check.

Questions

Broom and Textured Finishes FAQ

Is a broom finish slippery when wet?

No. The ridges give good traction, which is why it is common for driveways and walks.

Can I get a smoother finish?

Yes. A smooth trowel finish is nice indoors, but is slick outside, so we use texture for exterior surfaces.

Can you add color to a broom finish?

Yes. Integral color and stain work well with it.

How long does the texture last?

It wears slowly, and sealing helps preserve it.

What is a salt finish?

A finish made by pressing rock salt into the surface and washing it out, leaving small pits for grip.

Next step

Get your free Broom and Textured Finishes estimate.

Tell us about the project and we will call you back to talk it through.

Or call (615) 357-7797 to talk now.

Tell us about your project

We will call you back to talk it through and set up a visit.

Prefer to talk? Call (615) 357-7797. We never sell your information.

Call NowFree Estimate