
Color added to new concrete or applied to existing slabs, from soft earth tones to bold accents, sealed to last.
Plain gray concrete is practical, but it is not the only choice. Color can warm up a patio, tie a driveway to the brick on a house or give a pool deck a cooler tone. There are several ways to add it, and each behaves differently. Color mixed into the whole batch runs through the slab, a hardener broadcast on the surface gives a denser top, and stains soak into an existing slab to give mottled, natural shades. A Nashville home with red brick, gray stone or white siding calls for a color chosen with care.
We bring samples and show how each product looks on concrete, not just on a color card. For new slabs we recommend integral color or a color hardener, depending on the finish and the look you want. For existing concrete in sound condition, we clean and prep the surface and apply stain or tinted sealer. We explain that color shifts as concrete cures and dries, test a small area when it helps and finish with a sealer that protects the tone.
Concrete color looks different from a paint chip, so we show it on actual concrete.
Mixed-in color lasts through wear, while surface color gives a different, richer look.
Sound concrete can be stained in earthy tones without being torn out.
A good sealer slows fading and makes colors look deeper.
Drag the handle to compare.

BeforeAfterWarm and natural.
See it on concrete.
Runs through.
For existing slabs.
Slow fading.
Realistic results.
Every topic has its own page with what to expect and how we approach it.
Site situationSelling Your HomeCracked, stained or uneven concrete hurts curb appeal. Here is how smart repairs and finishes help a home…Learn more
Site situationPool and Outdoor Living SpacesPool decks, patios and outdoor kitchens need cool, safe and good-looking surfaces. Here is how to choose them.Learn more
Site situationHOA and Neighborhood RulesAssociations and cities have rules for concrete. Here is what they usually cover and how to plan around…Learn more Try colors, stain tones and finishes on a sample patio and see how they might look in your space.
You tell us about your site and what you want, new concrete, a repair or a refresh, and we set a visit that fits your day.
We walk the property, measure the area, check drainage, soil and access, look at any old concrete and take photos of anything of note.
We explain your options for thickness, steel, finishes and colors, sketch the layout and give you a written scope with clear timing and pricing.
We arrange for underground utilities to be located, protect the house, lawn and landscaping, remove old concrete if needed and compact a stone base.
We set forms and steel, check heights and slopes, place and finish the concrete and cut joints, with the crew on site from the first truck to the last pass.
We protect the concrete as it cures, clean up the site, walk you through when to use it and seal it, and set a reminder for your next check.
Integral color is mixed into the concrete and runs through it. Stain soaks into the surface of a cured slab and gives mottled tones.
If it is sound and clean, a stain or a tinted sealer can change the color. An overlay can change it more.
Close, but concrete varies with the mix and curing. We test and set expectations first.
Sun and wear can dull it over time. Resealing keeps it fresh.
Color adds some cost, and the amount depends on the method and the area.
Stamped ConcretePoured concrete patterned and colored to look like stone, slate, brick or wood, with the strength of a…Explore
Stained ConcreteAcid and water-based stains that give concrete floors, patios and walks a rich, marbled color with no added…Explore
Concrete OverlaysA thin, well-adhered surface layer that renews worn, stained or outdated concrete without tearing it out.Explore
Concrete SealingSealers for driveways, patios, pool decks and floors that protect against stains, water and salt and bring out…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.