
A thin, well-adhered surface layer that renews worn, stained or outdated concrete without tearing it out.
Not every tired slab needs to be broken out. If the concrete underneath is solid, with no deep cracks, heaving or major settlement, a thin overlay can make it look new. Overlays are cement-based coatings, usually polymer-modified, applied in layers from a thin skim to about half an inch. They cover stains, scaling, hairline cracks and an outdated look, and they can be colored, textured or stamped. For a Nashville patio or pool deck that is only worn on the surface, an overlay saves the cost and the mess of demolition.
The key to a lasting overlay is preparation. We inspect the slab, repair cracks and spalls and clean it thoroughly, often with shot blasting or grinding to open the surface so the overlay bonds. A primer goes on, followed by the overlay, which is spread and finished to a smooth, textured or patterned look. Once cured, we seal it with a product matched to the finish. We are upfront if a slab is not a good candidate and replacement is the better answer.
Overlays work on sound concrete. We look for deep cracks, movement and moisture before recommending one.
Cleaning, grinding or blasting opens the concrete so the overlay grips and does not peel.
Overlays can be smooth, broomed, stenciled or stamped, in a wide range of colors.
A sealer shields the overlay from stains, water and wear.
Drag the handle to compare.

BeforeAfterNo demolition.
Honest advice.
Strong bond.
Many styles.
Stain resistant.
Often days.
Every topic has its own page with what to expect and how we approach it.
Site situationOlder Homes and Cracked ConcreteOld slabs crack, settle and stain. Here is how to decide between repair, lifting, resurfacing and replacement.Learn more
Site situationSelling Your HomeCracked, stained or uneven concrete hurts curb appeal. Here is how smart repairs and finishes help a home…Learn more
Site situationPool and Outdoor Living SpacesPool decks, patios and outdoor kitchens need cool, safe and good-looking surfaces. Here is how to choose them.Learn more Check the signs you see in your concrete and get a likely cause with the next step.
You tell us about your site and what you want, new concrete, a repair or a refresh, and we set a visit that fits your day.
We walk the property, measure the area, check drainage, soil and access, look at any old concrete and take photos of anything of note.
We explain your options for thickness, steel, finishes and colors, sketch the layout and give you a written scope with clear timing and pricing.
We arrange for underground utilities to be located, protect the house, lawn and landscaping, remove old concrete if needed and compact a stone base.
We set forms and steel, check heights and slopes, place and finish the concrete and cut joints, with the crew on site from the first truck to the last pass.
We protect the concrete as it cures, clean up the site, walk you through when to use it and seal it, and set a reminder for your next check.
When the slab is structurally sound and the problem is surface wear, stains, scaling or a dated look.
When the slab has settled, heaved or cracked deeply, since an overlay cannot fix movement.
From a thin skim to about half an inch, depending on the product and the finish.
Proper cleaning and priming give a strong bond, and sealing protects it.
Many are done in a few days including prep, with curing after.
Concrete ResurfacingThin resurfacing systems that smooth rough, pitted or scaled concrete and give it a fresh, uniform face.Explore
Stained ConcreteAcid and water-based stains that give concrete floors, patios and walks a rich, marbled color with no added…Explore
Concrete Pool DecksCool, non-slip concrete pool decks that handle water, sun and bare feet, with clean edges and drainage that…Explore
Removal and ReplacementCareful demolition, haul-off and new pours for slabs that are too damaged to repair, with a better base…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.